After changing cartridge printer is stuck on "Printing Alignment"

Peripherals

Peripherals
Dell Monitors, Printers, Projectors, Hardware and Software discussion

After changing cartridge printer is stuck on "Printing Alignment"

This question is not answered

I cannot print a test page. It says the printer is "busy". The small task window says "Printing Alignment", but nothing happens. I tried to download the Documentation, but couldn't open it. Please help.

All Replies
  • Howard8824,

     

    Unplug the printer from the wall. Now remove the power brick from the back of the printer for 60 seconds. Plug everything back in. This will reset any error messages the printer has.

     

    Power on the printer. Open the printer and take out the Dell Series 9 Black cartridge. make sure all the tape is off the cartridge and put the cartridge back in. Now do the same for the Dell Series 9 color cartridge.

     

    You are using Dell Series 9 ink cartridges, correct?

     

    Dell Series 9 ink cartridges have a sensor in them that cannot be reset. Article on refilling Dell ink cartridges.

     

    Dell Series 9 ink cartridges can be purchased at Staples, Walmart or Dell's Website.

     

    Black cartridge = black side(left side)          Color cartridge = color side(right side)

     

    Photo cartridge = black side(left side)          Color cartridge = color side(right side) 

     

    It is possible to get a Dell Series 9 cartridge with a bad sensor. Contact the place of purchase for a replacement.

     

     

    Rick

    #DellRockStar

    What is a Dell Service Tag and how do I locate it? 

     

     

    Original poster, If you have solved your problem, can you please mark the correct thread(s) with your solution. Thanks 

    Welcome to Dell Community!