Hello all, I have a Dell xps M1530 laptop. A few months ago my battery started to go. I just purchased a new one from Dell and it worked good for a few days then for some some reason the laptop won't run when it is not plugged into the AC adapter. I have tried unplugging the AC and taking the battery out and holding down the start button for 30 seconds and that didn't do anything. On the tool bar the battery shows its 100% fully charged and the lights on the battery itself also says it's fully charged. Any suggestions on what might be causing this?
It could be annoying when the laptop fails to work with the battery and appreciate your efforts to fix the issue. To provide appropriate information or a resolution, I need additional details:
1. Does the laptop work with both the Battery and AC Adapter connected?2. Does the laptop work only with the AC Adapter connected?
Please reply to this message with the requested information.
Thanks and Regards,Rajath NDell Social Media and Community Professional Order Status : http://dell.to/1fgKSTr Download Drivers : http://dell.to/1hcxG98
Yes it is very annoying.
1- Yes the laptop does work with both connected. I can take the battery out and the laptop still runs and does recognize the battery is out on the tool bar
2-Yes the laptop only works with the AC adapter connected. If you disconnect the power cord it immediately goes off with no sign of life at all.
i have the same issue with my M1530. I bought a new 9-cell battery with a 65w power adapter. I just bought a 90w power adaptor in hopes this will fix my non-charging issue, but does not explain why the laptop won't work with just the battery. Any help?
Hi sirrob28 and boxlotto,
Thank you for your reply and for providing an update. I suggest you to run online component diagnostics on the battery by visiting the following link:http://dell.to/We70YO
Please let me know the result of the test.
I ran the battery test and it passed showing no issues.
Thank you for your reply and for providing an update. I suggest you to check if the AC Adapter is detected in BIOS. If yes, then update the BIOS to the latest version. You can download the latest BIOS from the following link by punching in the Service Tag:http://dell.to/QjjZDA
If the BIOS update fails, then please check the warranty by entering the Service Tag in the following link and let me know as this seems to be a motherboard issue:http://dell.to/Mbe3zg
At start up, system says adapter may be too low on power (something to that effect). I have a 90w adapter coming to replace the 65 watt. Battery tested good. Motherboard was just back from repair and tested good. Updated from BIOS A09 to A12, but the laptop still will not run off of the battery.
Thank you for your reply. This issue could also be due to the AC Adapter. Please let me know status after using the 90W adapter.
After plugging in the new adapter, I get the same message at start-up that it does not recognize the power adaptor. It will charge the battery for a few minutes and then stop. I also installed bios A09 and A12, but it made no difference. I also reset the power adapter. Any help?
I also updated the bios and nothing has changed. I wonder why the AC adapter would have anything to do with the battery, especially when it says the battery is 100% charged .
Hi boxlotto and sirrob28,
Thank you for your replies and request you to send the system Service Tag including the name on the account and contact details(including the new battery purchase order number) in a Private Message so that I can check the details and provide the options available.
To send a Private Message, click on my name highlighted in Blue on the webpage and click on “Start Conversation.”
Both power adapters and the battery are aftermarket.
The company i bought the adapter from is asking for the following information about the original Dell adapter. Can you provide me withe following information? This is not available on Dell's site.
Printed on the original adapter:
1. The output voltage(V):
2. The output Current(A):
3. The model of your laptop: M1530
4 .The size of the DC jack(tip):
Thank you for your reply. The details of the output voltage and current are as provided below:
Output Voltage: 19.5 +/–1 VDCOutput Current: 5.62 A (maximum at 4-second pulse 4.62 A (65 W) (continuous)The size of the DC jack can be verified from the old adaptor. Please let me know if you need further information.