First of all i would like to know what is the default SSD setting for Alienware M14x R2? Is it RAID or AHCI? Previously i was using RAID mode and the boot up time was pretty fast (approx. 25 sec) to get into windows. But unfortunately my software got corrupted after i performed disk cleanup and i was not able to access windows or even reformat it so i called up dell and the agent assisted me through out the whole process of reformatting my laptop. He guided me into the bios and ask me to change the SSD mode from RAID to AHCI this is what enable me to reformat my laptop again. I do notice that after switching to AHCI my laptop boot up speed dropped drastically it is taking more than a minute to get into windows. I tried to switch it back to RAID mode from the bios but was unable to access into windows. When i called again to en-quire about this issue the agent advised me to stick to AHCI setting. I have a few questions here in; what is the big difference between AHCI and RAID? besides the boot up speed? How come my laptop boot up speed will be so much slower in AHCI mode? I am quite upset with the slow boot up speed of my laptop despite having a high end specs. Can anyone or any expert give me some advise regarding this issue i am facing?
Hi YC MOOK,
The default setting for SSD for Alienware M14xR2 is RAID. The considerable drop in boot speed is because the SSD drive is no longer being used for caching purposes.
In AHCI configuration the hard drives work independently whereas in RAID mode the hard drives work in collaboration and complement each others functions.
In AHCI mode as the hard drives are no longer associated to each other, so the SSD is no longer being used for caching purposes and hence there is a significant drop in system performance.
You need to change the SATA operation in BIOS to RAID and re-install the operating system and install the IRST driver and configure SSD for acceleration purposes. You may refer to the article Here.
Note : Please backup the data before re-installing the operating system as it leads to complete data loss.
Hope this helps. Please reply if you have any further questions.
Thanks & Regards,Sundeep B#iworkfordellTo know more about Dell Product Support, Drivers & Downloads, Order & Dispatch status -> choose your region USA;India For helpful Dell Support Videos, you may click Here.
To avoid any confusion, I want to clear something out: default SATA mode on the BIOS depends on the configuration of the system, the m14x r2 is offered with 4 different configurations for storage devices, SSD or HDD alone, SSD+mSATA on RAID 0, HDD+mSATA caching SSD and HDD + mSATA boot drive. It's safe to asume, given your explanation, that you have a caching device, in which case the configuration in the BIOS should be RAID, but there is no need to re install the OS if the caching drive is disabled, you only need to do this:
1. Open the start menu.
2. Right-click on "Computer" and select "Manage"
3. Find "Disk Management" under Storage and there should be 4 partitions, the C: drive, the recovery partition, the system reserve and the mSATA device, right click on the mSATA drive and select "Format" and make sure it's set as "unallocated space".
4. Install the Intel Rapid Storage Technology driver if it's not installed yet, here's the link for the download:
M14x r2 Intel Rapid Storage Technology driver (IRST)
5. Follow the steps in the article shared by Sundeep (How to Enable Caching on mSata SSD for Alienware Laptops?) and start from the part that says "After Windows Reinstall"
The SATA mode in the BIOS will be changed automatically after you follow these steps, you don't need to change it yourself.
Alienware-Natalia Dell | Alienware Technical Support #iwork4Dell Opening your case does not void your warranty! Check out Alienware Artificial Intelligence I can't always reply to PM's, if you need extra assistance visit:
Hi Natalia thank you so much for the very useful info. But I already proceeded to reformat my computer and did a fresh reinstall of windows before I saw your reply. Anyway I still have some doubts regarding the mSata SSD. 1.) What is the different between the enhanced mode and the maximized mode? which one is more commonly used? After I have set the mSata SSD to enhanced mode in future if I want to reformat my computer again must I disable the mSata SSD?
Hi YC MOOK,
The answers to your questions are as follows :